 |
| MODEL 2001-SL SLIMLINE CHANNELIZER™ |
Click here to download the specification for the Model 2001-SL Slimline Channelizer™ in a Portable Document Format [pdf].
|
|
Intent Yodock® Model 2001-SL Channelizer™ is a recyclable, portable energy disbursement cell. It is the intent of this specification to describe a lightweight, portable plastic traffic control device. The intended use of the Yodock® 2001-SL Channelizer™ is to assist in the deliniation of a work zone or gore area, street and road closures, as well as providing clear delineation for traffic channelization, pedestrian safety and construction areas. Actual unit measurements are nominal and may be subject to change. |
Scope This Specification recognizes the need for a lightweight, portable traffic control device to perform some of the functions of longitudinal channelizing barricades, cones, barrels, Types I, II and III Barricades and other such devices used to control, direct, channel and stop vehicular and pedestrian traffic for purposes of aiding in containment and/or safety.
|
|
Construction
The 2001-SL Channelizer™ is made using rotational molding to ensure watertightness and integrity. The unit is manufactured with internally molded baffels in order to maintain its shape, be properly sealed and leakproof. The unit is provided with drain plugs and underside grooves to allow flow of surface drainage. The unit can also be filled with foam material. The nominal dimensions of the unit are as follows:
Height: 18”
Female Recess: 7” length
Top Width: 6”
Base Width Including Flanges: 20”
Top Fill Holes: 4”
Base Width Not Including Flanges: 12”
Empty Weight: 38 lbs
Functional Length: 72”
Male Connection: 8”
Post Boot: 3.50” and 2.50”
Water Filled Weight: 330 lbs
Material: The material is a recyclable polyethylene. It is rotational molded to a thickness of approximately .150 for the standard units and .250 with the optional heavy duty unit.
Ultraviolet Light: An ultraviolet light inhibitor is introduced into the raw material mix to provide sufficient protection to ensure reasonable life of the product in all weather conditions.
Colors: The standard colors of the 2001-SL are opaque ivory and orange. Other colors may be introduced from time to time as required, to comply with state and federal regulations. Custom colors are available for special orders.
|
Installation
|
|
The units can be interlocked end-to-end. When installed as a work zone safety device or road closure, the units may be used empty, ballast, or completely filled with water. Warning flags, steady burning lights or flashing lights can be securely mounted to each unit, if conditions require.
|
The unit is joined by a unique connection system, which provides a positive interlock, while allowing for approximately 22 degrees of articulation between units. The unit has ports positioned on the bottom flanges, devised to allow for ground mounting and forklift holes for ease of mobility when filled. Post boots at the bottom interior of the unit allow for sign and fence post mounting.
|
Photo Gallery 
